Detailed information
- Lenght of shank 5.0 mm, 13.5 mm
- Diameter 3.5 mm
- standard Anvils with pitch 60° (metric thread), 55° (Withworth thread)
- special Anvils with pitch 30° (trapeze thread), 29° (Acme- / Acme-Stub-thread), 30° (rounde thread), 80° (Steel conduit thread)
For metric external thread (60°)
| Order-No. | Pitch (mm) |
| 76 9206 000 24 | 0,2 |
| 76 9206 003 24 | 0,225 |
| 76 9206 006 24 | 0,25 |
| 76 9206 009 24 | 0,3 |
| 76 9206 012 24 | 0,35 |
| 76 9206 020 24 | 0,4 / 0,45 |
| 76 9206 024 24 | 0,5 / 0,6 |
| 76 9206 028 24 | 0,7 / 0,75 / 0,8 |
| 76 9206 036 24 | 1,0 / 1,25 |
| 76 9206 040 24 | 1,5 / 1,75 |
| 76 9206 044 24 | 2,0 / 2,5 |
| 76 9206 048 24 | 3,0 / 3,5 |
| 76 9206 052 24 | 4,0 / 4,5 / 5,0 |
| 76 9206 058 24 | 5,5 / 6,0 |
For metric internal thread (60°)
| Order-No. | Pitch (mm) |
| 76 9216 018 24 | 0,35 |
| 76 9216 020 24 | 0,4 / 0,45 |
| 76 9216 024 24 | 0,5 / 0,5 |
| 76 9216 028 24 | 0,7 / 0,75 / 0,8 |
| 76 9216 036 24 | 1,0 /1,25 |
| 76 9216 040 24 | 1,5 / 1,75 |
| 76 9216 044 24 | 2,0 / 2,5 |
| 76 9216 048 24 | 3,0 / 3,5 |
| 76 9216 052 24 | 4,0 / 4,5 / 5,0 |
| 76 9216 058 24 | 5,5 / 6,0 |
For Withworth external thread (55°)
| Order-No. | Pitch (TPI) |
| 76 9205 009 24 | 80 |
| 76 9205 012 24 | 72 / 64 |
| 76 9205 014 24 | 60 / 48 |
| 76 9205 018 24 | 40 / 32 |
| 76 9205 022 24 | 28 / 26 / 24 / 22 |
| 76 9205 030 24 | 20 / 19 / 18 / 16 |
| 76 9205 038 24 | 14 / 12 / 11 |
| 76 9205 044 24 | 10 / 9 / 8 |
| 76 9205 050 24 | 7 / 6 |
| 76 9205 054 24 | 5 / 4½ / 4 |
| 76 9205 064 24 | 3½ / 3¼ / 3 / 2 7/8 / 2¾ |
| 76 9205 074 24 | 2 5/8 / 2½ / 2 |
For Withworth internal thread (55°)
| Order-No. | Pitch (TPI) |
| 76 9215 014 24 | 60 / 48 |
| 76 9215 018 24 | 40 / 32 |
| 76 9215 022 24 | 28 / 26 / 24 / 22 |
| 76 9215 030 24 | 20 / 19 / 18 / 16 |
| 76 9215 038 24 | 14 / 12 / 11 |
| 76 9215 044 24 | 10 / 9 / 8 |
| 76 9215 050 24 | 7 / 6 |
| 76 9215 054 24 | 5 / 4¼ / 4 |
| 76 9215 064 24 | 3½ / 3¼ / 3 / 2 7/8 / 2¾ |
| 76 9215 074 24 | 2 5/8 / 2½ / 2 |
Anvils for external threads cannot be used for measuring internal threads or vice versa.
1) Anvils for external threads are marked with the pitch, for
internal threads with the letter „J“ and the pitch.
2) The notch covers 3 pitches, for setting use thread plug gauge /-ring gauge.All series also available in shaft length 15,5 mm.