Passameter

Passameter are known also as adjustable snap gauges that are used for both measurements on rotationally symmetric components (e. g. shafts, axles, plines) and thickness measurements or other length measurements.
Replaces many fixed gauges due the integrated dial gage which permits rapid comparative indicating measurements. Calibration ajainst gage blocks is just a "snap"!
 
Technical data
  • Graduation: 1 µm / 2 µm
  • Scale division size: ≈ 0,8 mm
  • Indication range: ± 70 µm / ± 140 µm
  • Constant measuring force: 5-10 N
  • Retraction range: ≈ 2,5 mm
  • Measuring surface diameter: 10 mm
  • Surface flateness: ≤ 0,3 µm
  • Parallelism of surfaces:  ≤ 1 µm
 
 

Digital Passameter 3902

The digital Passameter 3902 for the inspection of narrow manufacturing tolerances is featured by very high accuracy and a big, direct measuring range of 4 mm.
The mobile measuring probe placed underneath and the constant meauring force ensure the extreme high repeatabilty of <0,3 µm.
 
Technical data
  • Lifting range 4 mm
  • Resolution 0,001 mm / 0,0001 mm or 0.00005 / 0.000005 inch
  • 7-digit display
  • indication module rotatable
  • PRESET function
  • Tolerance mode/MAX/MIN-mode
  • Changeover of measuring direction
  • Bargraph indication
  • Measuring contacts in carbide ø 10 mm
  • Lifting device
  • Centering support
  • Data output IBRit-rf1-III
  • Protection grade IP 65
  • Delivery in case
 
 

External precision micrometer 0537 with integrated dial comparator

Technical data:
  • Measuring range 0 - 300 mm  
  • Error limits according DIN 863-3
  • Measuring faces Ø 8 mm
  • Carbide tipped measuring faces
  • Heat insulators
Details Micrometer:
  • Micrometer
  • Measuring range 25 mm
  • Readings 0,01 mm
  • Spindle thread pitch 0,5 mm
  • Thimble-Ø 21 mm
  • Thimble, sleeve and reading parts satin chromed
Details Dial Comparator:
  • Dial Comparator
  • Measuring range ± 70 μm
  • Readings 1 μm
  • Measuring range ± 140 μm
  • Readings 2 μm
  • Constant measuring force 5 – 10 N
  • Delivery in wooden case
 
 

Comparator snap gauges 820

Technical data
  • For cylindrical parts such as shafts, bolts and spindles, for the thickness and length measurements
  • Non-rotating (floating) spindle
  • Locking lever
  • Carbide tipped measuring faces
  • Heat insulators
  • Constant measuring force
  • All indicating instruments has a 8 mm mounting shank may be used
  • Delivery without dial gauge
  • Delivery in wooden case
 
 

Digital Micrometer 0700

Technical data
  • Measuring range 0 - 300 mm
  • Error limits according works standard
  • Linear measuring system
  • Non-rotating (floating) spindle
  • Positive counting in case of ingoing spindle
  • Locking lever
  • Spindle thread pitch 1 mm
  • Measuring faces Ø 8 mm
  • Carbide tipped measuring faces
  • LCD display 6 mm
  • Opto RS 232 Interface
  • Switchable reading 0.01 mm / 0.001 mm; 0,0005 inch / 0,00005 inch
  • Measuring force by ratchet 5-10 N
  • Heat insulators
  • Delivery in wooden case incl. battery: CR 2032
  • Note: starting from measuring range 100 mm included setting gauges
 
 

Digital Micrometer 0700 with retraction lever

Technical data
  • Measuring range 0 - 300 mm
  • Retraction 1,5 mm
  • Error limits according works standard
  • Linear measuring system
  • Non-rotating (floating) spindle
  • Positive counting in case of ingoing spindle
  • Spindle thread pitch 1 mm
  • Measuring faces Ø 8 mm
  • Carbide tipped measuring faces
  • LCD display 6 mm
  • Opto RS 232 Interface
  • Switchable reading 0.01 mm / 0.001 mm; 0,0005 inch / 0,00005 inch
  • Heat insulators
  • Delivery in wooden case incl. battery: CR 2032
  • Note: Starting from measuring range 100 mm included setting gauges
 
 

Precision Micrometer 201S

Technical data
  • Measuring range 0 - 300 mm
  • Error limits according DIN 863
  • Spindle thread pitch 0,5 mm
  • Thimble-Ø 19 mm
  • Measuring faces Ø 8 mm
  • Thimble and sleeve satin chromed
  • Carbide tipped measuring faces
  • Heat insulators
  • Measuring range 25 mm
  • Readings 0,01 mm
  • Spindle thread pitch 0,5 mm
  • Delivery in wooden case
  • Setting standards series 710 as option
 
 

Precision Micrometer 230

Technical data
  • Measuring range 0 - 175 mm
  • Error limits according DIN 863
  • Spindle thread pitch 1 mm
  • Thimble-Ø 25 mm
  • Measuring faces Ø 8 mm
  • Thimble and sleeve satin chromed
  • Carbide tipped measuring faces
  • Heat insulators
  • Measuring range 25 mm
  • Readings 0,01 mm
  • Delivery in wooden case
 
 

Precision Micrometer 219

Technical data
  • Measuring range > 150 mm
  • Error limits according DIN 863
  • Measuring faces Ø 8 mm
  • Thimble and sleeve satin chromed
  • Carbide tipped measuring faces
  • Grounded precision spindle
  • Heat insulators
  • Ratchet is integrated in the thimble
  • Locking device
  • Measuring range 25 mm
  • Readings 0,01 mm
  • Delivery in wooden case
  • Setting gauges series 710 / 720 as option
 
 

Precision Micrometer 220

Technical data
  • Measuring range up to 6000 mm
  • Error limits according DIN 863
  • Spindle thread pitch 1 mm
  • Thimble-Ø 25 mm
  • Thimble and sleeve satin chromed
  • Carbide tipped measuring faces
  • Heat insulators
  • Measuring range 25 mm
  • Readings 0,01 mm
  • Reading dial gauge 0,01 mm
  • Delivery in individual packages
  • Setting gauges series 710 / 720 as option
  • Centering support add. on request
 
 

Precision Micrometer 223 with interchangeable anvils

Technical data
  • Measuring range 0 - 2950 mm
  • Error limits according DIN 863
  • Spindle thread pitch 1 mm
  • Thimble-Ø 25 mm
  • Measuring faces Ø 8 mm
  • Thimble and sleeve satin chromed
  • Carbide tipped measuring faces
  • Heat insulators
  • Ratchet is integrated in the thimble
  • Measuring range 25 mm
  • Readings 0,01 mm
  • Including setting gauges
  • Delivery in individual packages
 
 

Digital Micrometer 0701 with wedge blade

Technical data
  • Measuring range 0 - 50 mm
  • Error limits according works standard
  • Linear measuring system
  • Non-rotating (floating) spindle
  • Positive counting in case of ingoing spindle
  • Locking lever
  • Spindle thread pitch 1 mm
  • Measuring faces Ø 8 mm
  • Carbide tipped measuring faces
  • LCD display 6 mm
  • Opto RS 232 Interface
  • Switchable reading 0.01 mm / 0.001 mm; 0,0005 inch / 0,00005 inch
  • Measuring force by rachet 5-10 N
  • Heat insulators
  • Delivery in wooden case incl. battery: CR 2032
 
 

Precision Micrometer 380 measuring narrow recesses

Technical data
  • Measuring range 0 - 400 mm
  • Error limits according DIN 863-3
  • Non-rotating (floating) spindle
  • Heat insulators
  • Measuring range 25 mm
  • Readings 0,01 mm
  • Spindle thread pitch 0,5 mm
  • Thimble-Ø 19 mm
  • Thimble, sleeve and reading parts satin chromed
  • Delivery in wooden case
 
 

Digital Micrometer 0701 measuring narrow recesses

Technical data
  • Error limits according works standard
  • Linear measuring system
  • Non-rotating (floating) spindle
  • Positive counting in case of ingoing spindle
  • Locking lever
  • Spindle thread pitch 1 mm
  • Measuring faces Ø 8 mm
  • Carbide tipped measuring faces
  • LCD display 6 mm
  • Opto RS 232 Interface
  • Switchable reading 0.01 mm / 0.001 mm; 0,0005 inch / 0,00005 inch
  • Measuring force by ratchet 5-10 N
  • Heat insulators
  • Delivery in wooden case
  • Note: starting from measuring range 100 mm included setting gauges
 
 

Precision Micrometer 379 measuring keyway widths

Technical data
  • Measuring range 5 - 55 mm
  • Error limits according DIN 863
  • Non-rotating (floating) spindle
  • Ratchet
  • Measuring range 25 mm
  • Readings 0,01 mm
  • Spindle thread pitch 0,5 mm
  • Thimble-Ø 19 mm
  • Parallax free reading
  • Thimble, sleeve and reading parts satin chromed
  • Delivery in wooden case
 
 

Precision Micrometer 344 measuring inside recesses

Technical data
  • Measuring range 25 mm
  • Readings 0,01 mm
  • Spindle thread pitch 0,5 mm
  • Thimble-Ø 19 mm
  • Parallax free reading
  • Thimble, sleeve and reading parts satin chromed
  • Delivery in wooden case
 
 

Precision Micrometer 340 measuring workpieces having odd-numbered splines

Technical data
  • Error limits according DIN 863
  • Measuring range 15 or 20 mm
  • Readings 0,01 mm
  • Spindle thread pitch 0,5 mm
  • Thimble-Ø 19 mm
  • Thimble, sleeve and reading parts satin chromed
  • Delivery in wooden case
 
 

Precision Micrometer 337/338 with deep throats for measuring plates and sheets

Technical data
  • Error limits according DIN 863
  • Measuring range 25 mm
  • Readings 0,01 mm
  • Spindle thread pitch 0,5 mm
  • Heat insulators
  • Carbide tipped measuring faces
  • Thimble-Ø 19 mm
  • Thimble, sleeve and reading parts satin chromed
  • Delivery in wooden case
 
 

Digital Micrometer 337/338 with deep throats for measuring plates and sheets

Technical data
  • Error limits according works standard
  • Linear measuring system
  • Non-rotating (floating) spindle
  • Positive counting in case of ingoing spindle
  • Locking lever
  • Spindle thread pitch 1 mm
  • Measuring faces Ø 8 mm
  • Carbide tipped measuring faces
  • LCD display 6 mm
  • Opto RS 232 Interface
  • Measuring range 25 mm / 1 inch
  • Switchable reading 0.01 mm / 0.001 mm; 0,0005 inch / 0,00005 inch
  • Measuring force by ratchet 5-10 N
  • Heat insulators
  • Delivery in wooden case
  • Note: Starting from measuring range 100 mm included setting gauges
 
 

Digital Micrometer 0701 with reduced anvils

Technical data
  • Error limits according works standard
  • Linear measuring system
  • Non-rotating (floating) spindle
  • Positive counting in case of ingoing spindle
  • Locking lever
  • Spindle thread pitch 1 mm
  • reduced anvils
  • Carbide tipped measuring faces
  • LCD display 6 mm
  • Opto RS 232 interface
  • Measuring range 25 mm / 1 inch
  • Switchable reading 0.01 mm / 0.001 mm; 0,0005 inch / 0,00005 inch
  • Measuring force by ratchet 5-10 N
  • Heat insulators
  • Delivery in wooden case
  • Note: not suitable for measuring balls; use series 76 8355
 
 

Setting gauges for micrometer 710 / 720

Technical data
Setting gauges for micrometer 710:
  • Error limits according VDI 2618 BC. 4.4
  • Special steel
  • Hardened measuring faces
  • Measuring faces lapped parallel
  • Heat insulated handle
  • Individually packed
Setting gauges for micrometer 720:
  • Error limits according DIN 863
  • Special steel
  • Hardened measuring faces
  • Spherical end faces
  • Heat insulated handle
  • Individually packed
 
 

Crankshaft tester 4400/4410

Technical Data
  • for measurement of the change of the crank web spacing of the built-in rotating crankshafts as a measure for the alignment of the bearings
  • positioning of the instrument in centering bores or directly on the webs
  • high positioning force
  • low inversion error
  • movement on jewels
  • angle of centering points 90°
  • reading 0,1 mm
  • delivery in wooden case
  • set consisting of: dial gauge, extensions, measuring tips to be screwed in
 
 

Digital crankshaft tester 3676

Technical Data
  • error limits according works standard
  • linear measuring system
  • non-rotating (floating) spindle
  • positive counting in case of ingoing spindle
  • locking lever
  • spindle thread pitch 1 mm
  • measuring faces Ø 8 mm
  • carbide tipped measuring faces
  • LCD display 6 mm
  • Opto RS 232 interface
  • measuring range 25 mm / 1 inch
  • switchable reading 0.01 mm / 0.001 mm; 0.0005 inch, 0.00005 inch
  • heat insultors
  • delivery in wooden case
 
 

Newsletter 03/2017

Weiter » (04.09.2014)