Customized Micrometer Heads

Special-Micrometer Heads 452 with rotating spindle

Special design available
  • Thread pitch: 0,5 mm
  • Thimble Ø (f): 52 mm
  • Error limits: 3 µm
  • DIN 863
  • With second inverse scale *(2)
  • With clamping nut *(20)
Special design
  • With spherical measuring face
  • For left-hand operation
  • Without ratchet
  • With fixing
  • With carbide-tipped measuring face
  • With thread fastening
  • With rapid drive
  • With inverse scale
Special design available
  • Thread pitch: 1,0 mm
  • Thimble Ø (f): 33 mm
  • Error limits: 3 µm
  • DIN 863
  • With second inverse scale *(2)
  • With clamping nut *(20)
Special design
  • With spherical measuring face
  • For left-hand operation
  • With ratchet
  • With carbide-tipped measuring face
  • With thread fastening
  • With inverse scale
Special design available
  • Thread pitch: 0,5 mm
  • Thimble Ø (f): 52 mm
  • Error limits: 3 µm
  • DIN 863
  • With second inverse scale *(2)
  • With clamping nut *(20)
Special design
  • With spherical measuring face
  • For left-hand operation
  • With ratchet
  • With carbide-tipped measuring face
  • With thread fastening
  • With inverse scale
Special design available
  • Thread pitch: 1,0 mm
  • Thimble Ø (f): 20 mm  30 mm (d)
  • Error limits: 3 µm
  • DIN 863
  • With spherical measuring face
  • With second inverse scale
  • For left-hand operation
  • With ratchet
  • With fixing
  • With carbide-tipped measuring face
  • With thread fastening
  • With rapid drive
  • With inverse scale
  • With clamping nut *(20)

Special-Micrometer Heads 453 with floating spindle

Special design available
  • Thread pitch: 1,0 mm
  • Thimble Ø: 30 mm
  • Error limits: 3 µm
  • DIN 863
  • With clamping nut *(20)

Special design
  • With spherical measuring face
  • With second inverse scale
  • For left-hand operation
  • Without ratchet
  • With carbide-tipped measuring face
  • With thread fastening
  • With rapid drive
  • With inverse scale
Special design available 
  • Thread pitch: 0,5 mm
  • Thimble Ø: 20 mm
  • Error limits: 3 µm
  • DIN 863
  • With clamping nut *(20)
Special design
  • With plain measuring face *
  • With spherical measuring face
  • With second inverse scale
  • For left-hand operation
  • Without ratchet *(7)
  • With carbide-tipped measuring face
  • With thread fastening
  • With rapid drive *(14)
  • With inverse scale
Special design available
  • Thread pitch: 1,0 mm
  • Thimble Ø: 30 mm
  • Error limits: 3 µm
  • DIN 863
  • With carbide-tipped measuring face *(10)
Special design
  • With spherical measuring face
  • With second inverse scale
  • For left-hand operation
  • With ratchet
  • With rapid drive
  • With inverse scale
  • With clamping nut
Special design available
  • Thread pitch: 0,5 mm
  • Thimble Ø: 16 mm 20 mm (e)
  • Error limits: 3 µm
  • DIN 863
  • With clamping nut *(20)
  • With thread fastening *(12)
Special design
  • With second inverse scale
  • For left-hand operation
  • With ratchet
  • With rapid drive
  • With inverse scale

Newsletter 03/2017

Weiter » (04.09.2014)